Nissan 370Z Forum - View Single Post

AntiVenom · 02-22-2015, 03:33 PM

cruz, you need to take in to account the narrower width. yours are 9" w/ +30 offset. his are 8.5 w/ +35. He'd need an 11mm spacer to match yours (which probably means a 10mm since that is most common) up front and a 21mm spacer in back (again, a 20mm would be the more common).

jnslance, you need to think about what you want in terms off "flushness" In my opinion for a flush look the numbers for a 9.5" wide FR and 10.5 RR are somewhere around +22 FR and +12 RR. So if you are looking to match those numbers you could do a 25mm spacer up Front. and a 30mm in the RR.

Peruse this thread [Official] 370z wheel fitment guide (pics/specs) only
Then use this calculator Wheel Offset Calculator to figure out what spacer you are looking for.

02-22-2015, 03:33 PM	#4 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 12	cruz, you need to take in to account the narrower width. yours are 9" w/ +30 offset. his are 8.5 w/ +35. He'd need an 11mm spacer to match yours (which probably means a 10mm since that is most common) up front and a 21mm spacer in back (again, a 20mm would be the more common). jnslance, you need to think about what you want in terms off "flushness" In my opinion for a flush look the numbers for a 9.5" wide FR and 10.5 RR are somewhere around +22 FR and +12 RR. So if you are looking to match those numbers you could do a 25mm spacer up Front. and a 30mm in the RR. Peruse this thread [Official] 370z wheel fitment guide (pics/specs) only Then use this calculator Wheel Offset Calculator to figure out what spacer you are looking for. Last edited by AntiVenom; 02-22-2015 at 03:45 PM.