Quote:
Originally Posted by USAF370z
1. Brake pad that are better than OEM, yet matches OEM pads with minimal brake dust. Also the should not cost over $100 per, front and rear.
|
Centric Posi-Quiets are about the only pads I've heard or seen that dust even close to as little as the OEM pads. But even they dust more IMO. Stick with OEM for least dust; I've tried three different pads and will be going back to OEM next. If you need performance pads, you will have to give up controlling the dust. Even so-called performance pads that advertise low dust end up dusting more than OEM without any significant increase in performance over OEM
Quote:
Originally Posted by USAF370z
2. Brake lines
|
Not necessary for street driving. However, they only cost $100, and the install is easy. Buy the non-premium ones from Z1 that get rid of the banjo bolts for fewer potential leaks points (have to get these for base, but they work with sport brakes too).
Quote:
Originally Posted by USAF370z
3. Rotors
|
Not necessary for street driving unless you just like the look. Like DE mentioned, there are track guys that use blank rotors. Generic blank rotors are cheap, and while they may not last as long on the track as some aftermarket rotors, they can be cheaper in the long run. I got some slotted rotors because I like the look and they are lighter than OEM rotors.
Quote:
Originally Posted by USAF370z
4. Brake fluid
|
This is the first thing that needs upgrading for any performance braking. But still not needed for street driving. Motul RPF600 is my choice because I can find it in town on short notice if necessary. It's probably overkill for a DD, but I don't replace brake fluid often enough to worry about that minimal cost difference.
Quote:
Originally Posted by USAF370z
Again the objective is to upgrade better than stock with let's say a budget of $500 or less. Any feedback is appreciated.
|
If you insist on spending $500 'upgrading' your brakes, I recommend you start with fluid and brake lines because they're cheap and easy. Buy a power bleeder if you plan to DIY and want make it easy on yourself. After that, what do
you want to do? If you can't do the work yourself, install costs are going to eat into the $500 very quick. Slotted rotors and pads cost me over $500 just for the fronts, and I did the install myself.