I just wanted to share my setup with everyone as I could not find any post or pics of custom koni's for a 370z just a 350z. Figure we should start sharing these setups to give others ideas.
My goal was to find a suspension that was from a good brand, was popular among autocrossers, had linear spring rates and would be reliable enough for me to daily drive. The end result, I started with a used set of koni yellows and then had some magic done by Jeff at proparts usa.
This setup has shortened front and rear shocks, adjustable koni sleeves on the front shocks, pillow ball top mounts, and 750/600lb hypercoils. This will be my autox setup so hopefully the spring rates will be good enough for double duty. Also just to get rid of the annoyance of adjusting the rears I had the rear koni adjusters changed from the sweep style to the knob style. It was really cheap to have this done and saves me from jacking the car up all the time.
Now enough talking here are some pics of my Koni Blacks. Hope this helps anyone else who is thinking about a custom setup. I think this setup should be able to keep up with the KW v3 considering that its linear, stiffer springs and pillowball top hats.
750/600 lb\in springs and helper springs for the rears
Megan racing high/low adjusters
Megan racing tophats
Adjusters for the rear is now on the top so I can reach it from the trunk
