Nissan 370Z Forum - View Single Post - NST Pulley - Installed and Reviewed! (Crank bolt removal tip inside!)

DOOMMONKEY777 · 01-12-2015, 05:52 AM

When i just bought my car it had 160miles on it,(it was driven to me) the first thing i bought is the magnet that goes on ur oil filter, now after i have removed the filter on the next oil change. I rolled the filter on the floor and u can clearly see which side has all the metal stuck to it, also it weighted as if the whole filter was full of oil in it when i let it drain for over 10 min.

I think am gonna put that pulley on as well, se if more shavings get stuck on the magnet.

Am at 32k and last oil change there where barely any shavings at all, so we'll see.

01-12-2015, 05:52 AM	#26 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Oct 2010 Location: Crooklyn Posts: 1,008 Drives: 370Z 6psd-sport-pkg Rep Power: 21	When i just bought my car it had 160miles on it,(it was driven to me) the first thing i bought is the magnet that goes on ur oil filter, now after i have removed the filter on the next oil change. I rolled the filter on the floor and u can clearly see which side has all the metal stuck to it, also it weighted as if the whole filter was full of oil in it when i let it drain for over 10 min. I think am gonna put that pulley on as well, se if more shavings get stuck on the magnet. Am at 32k and last oil change there where barely any shavings at all, so we'll see. __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane Last edited by DOOMMONKEY777; 01-12-2015 at 05:55 AM.