Quote:
Originally Posted by JWillis72
Are you running the 2" or 3.5" thick frozen boost?
|
24x12x1
It was measured out by the shop to fit in the confined space in front of and on the left of the radiator...(I wasn't there when they determined it)
There is a brace that limited the depth of the exchanger.
Here is the link to the one that I now have:
Air to Water Radiator
I don't know if I can go to a shorter/deeper 12x12x2 - same capacity/area as the 24x12x1
Here is the link to that one:
http://www.frozenboost.com/water-to-...or-p-1062.html
It (and the motor) are still out of the car ... so it's not cast in stone as to what the best solution is.
I'm open to any suggestions
Can you send the link to the 3.5"