Nissan 370Z Forum - View Single Post

JC-Nismo · 01-02-2015, 08:29 PM

I added an amp, sub and Zenclosure box to my Kenwood DNX8120 HU, but I can't get any sound to come from it. Been doing audio since I was a teenager and I'm sure all the wiring is perfect as this is the first time I've had this issue. This unit is the most complicated one I've owned by far and what I'm thinking is that the subs aren't getting a signal from the HU. I went through the manual and the HU itself and can't seem to get the HU to recognize or switch to Preout to get the signal from the sub. I could be wrong, but this is what I'm assuming is the problem, the amp is powered up properly with all new everything. Any help at all is deeply appreciated.

01-02-2015, 08:29 PM	#1 (permalink)
JC-Nismo A True Z Fanatic Join Date: Sep 2014 Location: Atlanta Posts: 1,244 Drives: 2011 Nismo 370z Rep Power: 13	Need help with Kenwood DNX8120 I added an amp, sub and Zenclosure box to my Kenwood DNX8120 HU, but I can't get any sound to come from it. Been doing audio since I was a teenager and I'm sure all the wiring is perfect as this is the first time I've had this issue. This unit is the most complicated one I've owned by far and what I'm thinking is that the subs aren't getting a signal from the HU. I went through the manual and the HU itself and can't seem to get the HU to recognize or switch to Preout to get the signal from the sub. I could be wrong, but this is what I'm assuming is the problem, the amp is powered up properly with all new everything. Any help at all is deeply appreciated.