Nissan 370Z Forum - View Single Post - NST Pulley - Installed and Reviewed! (Crank bolt removal tip inside!)

Mitco39 · 12-18-2014, 03:49 PM

The fact taht it says 30ft lbs and then turn an additional 90 degrees means the bolt is probably a torque to yield and should be replaced. It would also explain why you were unable to get it to go 90 degrees as the bolt would have already been stretched so to speak. Doubt you will have any issues with it tho.

12-18-2014, 03:49 PM	#5 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 132	The fact taht it says 30ft lbs and then turn an additional 90 degrees means the bolt is probably a torque to yield and should be replaced. It would also explain why you were unable to get it to go 90 degrees as the bolt would have already been stretched so to speak. Doubt you will have any issues with it tho. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html