ElwoodBlues

I didn't like the fake switches in the center console (since I don't have heated seats) so I decided to make my own panel. I cut out the bracing holding the switch blanks in place and sanded the top lip down to make room for a new top. I then made a plate from some scrap plastic and glued it to the top. Once it was filed down to shape I wrapped it with vinyl. I also wrapped the cup holder ring while I was at it.










The two buttons are for a rear view camera and a garage door opener. I hard wired the garage door opener for power and mounted it in the panel with the switches. I used an old computer hard drive power extension cable to make a quick disconnect for the camera/power cables.