View Single Post
Old 11-03-2014, 02:21 PM   #13 (permalink)
ANMVQ
A True Z Fanatic
 
ANMVQ's Avatar
 
Join Date: Mar 2011
Location: Framingham MA
Posts: 2,732
Drives: 2014 Q50 AWD
Rep Power: 19
ANMVQ will become famous soon enoughANMVQ will become famous soon enough
Default

Quote:
Originally Posted by niko86 View Post
i just found your log in the other thread
can't really find anything terribly wrong with it, apart from fuelling being kinda bouncy and not enough timing.

i would say you are missing a couple of degrees of timing in general.

it's a wild guess, but i would suggest cleaning up the fuel compensation map, AFRs should be more linear in open loop.
Apart from that, did your oil run hot?
How old are the plugs?
Did you use different fuel (maybe same grade but different fuel station) ?

there must be a reason for the car to pull timing, unfortunately on the cipher logs you don't have knock strength, you can log that using the Rom Editor.
That would at least indicate wether the ECU thinks it sees knocking and starts pulling timing advance.
I don't have an oil temp gauge and the G's usually don't have issue but I have an oil cooler Z1 anyways so I'd say no to that, Plugs are new had them changed at 60k(67k on the car). Fuel is the same station I always use, LOL wont go any were else. BTW say one I used for my coupe, I do not have KR strength I don't think I don't see it when I have to check the boxes for my logs am I missing something?
__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,
ANMVQ is offline   Reply With Quote