Quote:
Originally Posted by SouthArk370Z
As per RonRizz, most amps will handle an impedance mismatch reasonably well. There will be some added distortion but, if you don't push the amp hard, it shouldn't be a problem except for with the worst-designed units. However, if pushed hard into a low impedance, it will sound bad and can cause damage to the amp and speakers. Try to match impedance as closely as possible, but a small mismatch is not the end of the world.
Keep in mind that driver/speaker impedance is given as a nominal value and will, at resonance, be lower than the spec. A 2 Ohm speaker may have 1 Ohm impedance at resonance.
|
Thanks for the response. While I know many of the basics, always nice to get some confirmation (and learn something new) from those with more experience.
__________________
Fast Intentionz Header-back exhaust | Fast Intentionz Oil Cooler | Stillen Intake | Exedy Clutch | Uprev Tune | Kaaz Super-Q 2-way Diff | Nismo Diff Cover | Powertrix R/T Coilovers | SPL Toe Bolts and Camber Arms | Fastguy9r Hitch | Verde 19" Parallax Wheels
|