Thread: Stillen Gen 3
View Single Post
Old 10-11-2014, 11:23 AM   #3 (permalink)
Darketch
Enthusiast Member
 
Darketch's Avatar
 
Join Date: May 2013
Location: Virginia
Posts: 429
Drives: 14 NISMO #292
Rep Power: 12
Darketch is on a distinguished road
Default

Rajmangal7, I installed my G3s on my NISMO about a month ago. Install was pretty straight forward. I used the "sticky" G3 install thread and YouTube videos for the install. I can confirm that your G3 install is possible. The NISMO install is a little different, but no so different that you shouldn't be able to figure it out. Filter placement and how you cut your holes to get the proper angle is key. When installing the crossbar (3 bolt bar across the radiator) you may have to lightly press down to get the bolts in, just so long as you don't deform your filter. If you have your filters pressed in far enough, you should be able to bolt it back on with no issues.

Somewhere around the forums I saw a NISMO G3 DYI install thread...

Good luck, hope this helps.

War Eagle!
__________________
STILLEN G3 || F. I. CF Non-Resonated CBE
Darketch is offline   Reply With Quote