Ok so I finally got my Greddy Profec OLED/newer version installed and running
Here is where I put the controller, solenoid, and display:
Solenoid near battery:
Controller inside brake compartment:
And the sweet display:
Install wasn't too hard but the instructions weren't the greatest...I set up the solenoid for an external wastegate because thats what I have....ended up preventing the wastegate from opening and I boosted up to 15 psi :O.....I had to switch ports and go to what the instructions say is an internal/actuator type set up and that works. I have the SET set at 35 and I'm holding 9-10psi