Quote:
Originally Posted by FireDan50
For those of y'all with electronic boost controllers....just wondering where everyone mounted their solenoids and control units if applicable. I just bought the newer Greddy Profec and trying to figure out where/how to mount the solenoid and control unit.
|
If you're going to change it often, I would place it in the cubby hole underneath the triple gauge pod. Sacrifices that space, but very easy to reach and change on the fly. If you're going to occasionally change it, you could DIY it into the center console underneath the arm rest. I placed a GFB boost controller in the cubby hole, along with a couple of gauges to fill it up (boost, oil pressure, etc.). For the solenoid, connect it anywhere on the boost line to the wastegate, but use a T-connector (should be supplied with the solenoid). Best to leave the factory line on also, but I don't know if the ECU requires a boost reading. Check out MCM's DIY boost controller (in the second part of the video):
https://www.youtube.com/watch?v=OL11Etw7ZSg As for tuning (if you need help) the video is really helpful, but I still recommend using a dyno if possible.