If this is a factory Nismo RC then it is fitted with MotorSport ABS controller from Bosch.
The Daytona Couple that runs in the 12-hour Enduro here in Australia also has this and is fitted with full suite of Motec electronics and they had an ABS problem at the Bathurst 12-hour in Feb and the recommendation was to use the Motec logger which monitors pressure in the primary brake circuit and if the pressure goes above 1600psi (which is sufficient input pressure to cause a wheel lock and trigger the ABS), then the Motec PDU cuts power to the ABS which disables it and lets full-pressure thru to the caliper(s).
If this is a 370Z RC based on a road car, and it has the OEM ABS then this could be an "ice-mode" condition - only the car owners will know the detail.
RB
|