Also just to note the required steps for doing this while reusing the old vvel actuators and resetting the actuators, install cams, torque ladder assembly, check valve lash with feeler gauges per fsm, replace lifter with those of different sizes to bring lash to spec, rtv and do final torque on ladder asembly and vvel actuator bracket, reinstal timing case and chains, using a magnetic digital protractor set the vvel control shaft to minimum lift and turn back open 5.5 degrees, then adjust actuator by turning the screw shaft by hand and line up bolt holes in actuator to vvel control shaft holes, rtv and bolt actuator to head without moving the control shafts from the 5.5degree open position, follow procedure from fsm chapter em page 22 to reset sensors
__________________
ANSWER PRICE LIST
Answers - - - - - - - - - - - - - - - - $0.75
Answers (requiring thought) - - - - $1.25
Answers (correct) - - - - - - - - - - $12.50
|