Alright...so I thought everything was connected correctly because I was getting lights on the ASWC-1 unit. This is what I had...
Gray/Red wire going to Pink wire (Pin 6)
And Gray/Blue wire going to Blue wire (Pin 16)
Pin 15 is the black wire and I have that grounded.
So with the setup above I could only get the volume up and volume down buttons to work on the steering wheel via auto program.
I called AXXESS and they advised that I simply switch the setup above.
Meaning...
Gray/Red to Pin 16
&
Gray/Blue to Pin 6
Then to hold the reset button down for 3 seconds and wait till it goes steady then hold the volume up button until the light goes out.
Hopefully that will work out. Ready to put this behind me!!
Can anyone advise if this will work?
|