Gauges / Uprev / Widebands / Engine Monitoring?
Hey guys,
Long story short I'm installing twin turbos on my car and I'm trying to decide what type of setup to run to monitor everything. My goal is to install a screen in the center cubby to display as many readings as possible before installing gauges in the 3 dash pods. Ideally, I want to be able to have every reading displayed on the screen. I have read through many threads but still have unanswered questions. My car does not have the factory navigation screen so I will be installing my own. What I'm thinking will end up happening is I'll have to install a boost gauge and two independent aftermarket widebands in the 3 dash pods. Then find a system to display other parameters on the screen.
Main values I'd like to monitor:
1. Boost
2. Dual AFR (per bank)
3. Oil Temp
4. Oil Prs.
5. Fuel Prs.
6. EGT
1. The car is being tuned with UpRev. I have read that UpRev can be set up as a graphical user interface to be used for engine monitoring. What is needed to do this? What values can UpRev measure and display? Any downsides?
2. It is my understanding that the 370z already comes stock with two widebands. I have also read that the reading from the stock widebands are not as accurate as some aftermarket standalone widebands. Would you recommend running two aftermarket widebands or just monitor the OEM ones? Can UpRev monitor/display both AFRs simultaneously?
3. I have also read quite a bit on the HKS Camp2 system which is now discontinued. I have not been able to find a definitive answer if the Camp2 has the ability to display the OEM widebands or if it would be possible to add two widebands to it.
Thanks
|