Quote:
Originally Posted by kenchan
when i did the ranger method, which is 30 clutch in/out per cycle (x3 cycles), my clutch started to squeak during the 2nd cycle.
so you might want to do 15 in/out per cycle instead.
the squeaking went away after 5-10min though. i think the csc may have
heated up or something. not sure wat the squeaking was from.
|
I didn't use the ranger Method. Don't even know what it is. I used a master vac with tank to suck the fluid out of the reservoir. I then filled it back up with Dot 4 fluid. Go under the car and used the master vac again. loosened CSC bleed screw, installed the vaccum pump and tank. Vaccumed some fluid out, filled reservior again, Vacced more, etc. until the fluid coming out at the CSC was clean. I never touched the clutch pedal. I got all of the fluid out and then some. My clutch does feel so much better.