Quote:
Originally Posted by wstar
How deep under the car does the new one go? Does it completely replace the undertray (and re-use mounts?)
|
Its pretty much goes right pass the center of the axles by about 2 inch if I recall correctly. The reason for it was to make an enclosure to diffuse more air into the brakes.
As for the mount you are talking about, no ! hehe
there will still only be 6 link holding it,
4 to the frame and the 2 normal front one ...
On the picture below, if you look at the rear of the new splitter, you will see 3 slots cut into it, the middle one is the front jacking point if I endup using this instead of my new side mount by the door for what ever reason.
The 2 slots on either side are for the jack stand.
