Quote:
Originally Posted by GaleForce
It's the top fitting, the threads are dry, I witness oil escaping from the swivel seal... the tapered flare side of the fitting, apologies for the improper terminology. Superman himself could not get the fitting any tighter, that leaves debris, or damaged flare. I didn't notice any damage, but it's the only piece that I haven't replaced yet...
Are the fittings still good or will they continue to leak now that oil has got around the seal?
|
The tapered flare is not the swivel. The swivel is where the fitting can twist even after tight. The red nut tightens up against the swivel... its on the other end of the fitting from where the photo shows the drip. So if the swivel is leaking, then it would be traveling down the bent pipe and dripping off the flare nut.
If the swivel leaks, it will always leak. If the flare leaks, something is wrong with the flare and it requires inspection to know if it can be made to not leak or not.