The brace has to be shaved for clearance, bent around the pipe, removed (not recommended), or you can put a bunch of washers between the rear hangar to make the pipe hang lower. This will make the muffler position look odd. When I installed it, I was able to squeeze the brace back over the pipe with no modification, however, upon a second inspection, the brace put a nice dent in the pipe to fit. It probably happened once things heated up and got a little more malleable. I need to check again to see if it has gotten worse, or if things have settled.
__________________
Competition Clutch|Fast Intentions|Maxbore|NST|Setrab|Stillen|Tomei|Uprev| Z1
Avant Garde|SPC|Stance|Whiteline
Aerojacket|Seibon|Tanabe|TRS|TWM
|