Nissan 370Z Forum - View Single Post

aszyd · 08-08-2014, 08:36 PM

I have tried searching through the forums, Google, and the FSM and cannot find a pinout for the triple gauge harness. I'm trying to replace a couple of gauges and would like to power them through the harness. Using a multimeter has not yielded any positive results. Does anyone know which wires to use?

For reference there is a Black, Purple, two Yellows, and a Blue wire.

Also, for an oil temp gauge, can I use the stock wiring on the harness to get a signal or will I have to run a new sensor?

08-08-2014, 08:36 PM	#1 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	Triple Gauge harness pinout? I have tried searching through the forums, Google, and the FSM and cannot find a pinout for the triple gauge harness. I'm trying to replace a couple of gauges and would like to power them through the harness. Using a multimeter has not yielded any positive results. Does anyone know which wires to use? For reference there is a Black, Purple, two Yellows, and a Blue wire. Also, for an oil temp gauge, can I use the stock wiring on the harness to get a signal or will I have to run a new sensor? __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM