Quote:
Originally Posted by 09nismo498
i will be in for v1.5 as well. what was the cost again to upgrade? i can't remember which thread it was in
|
The upgrade will consist of the following items:
All new turbo to FMIC piping with BOV flange
New turbo compressor cover
Mocal thermostatic plate
One new -8an oil cooler line
One new oil filter
New air filter
New turbo inlet gasket
One additional silicone coupler
The price will be about $800. I thought I could keep it a bit lower, but all the materials and labour add up in a hurry.
Quote:
Originally Posted by TopgunZ
Sasha,
What ever happened to the catted exhaust mod? Is this still in the works? I would still love to buy this if you made them.
|
Quote:
Originally Posted by OldBoy
I'm also interested in this. 2015 is approaching and I'll need to pass an e-test on the Z before next summer.
Sasha, if you don't intend to build the catted downpipes, I'll have to look into getting dum-dum O2 sensors to simulate a healthy cat so I can turn back on the post cat O2 monitors. Having the post cat monitor turned off = automatic e-test fail = no plate renewal. F@$k the tree huggers  . |
I have not had that much time too look in to incorporating the converters in to the system. There isn't all that much room, and the converters I received were not as compact as I had hoped.