View Single Post
Old 08-06-2014, 03:55 AM   #4 (permalink)
Carbon_z
A True Z Fanatic
 
Carbon_z's Avatar
 
Join Date: Sep 2009
Location: Atlanta, GA
Posts: 1,694
Drives: Carbon Fiber 370z
Rep Power: 19
Carbon_z is a splendid one to beholdCarbon_z is a splendid one to beholdCarbon_z is a splendid one to beholdCarbon_z is a splendid one to beholdCarbon_z is a splendid one to beholdCarbon_z is a splendid one to behold
Default

Might have found corrupt. Vvel module

P1606 VVEL CONTROL MODULE
< DTC/CIRCUIT DIAGNOSIS > P1606 VVEL CONTROL MODULE

DTC Logic INFOID:0000000006217951
DTC DETECTION LOGIC
DTC No. Trouble diagnosis name (Trouble diagnosis content) DTC detecting condition Possible cause P1606 VVEL CONTROL MODULE (VVEL control module) • VVEL control module calculation function is malfunctioning. • VVEL EEP-ROM system is malfunctioning. • VVEL control module
DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING
1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition switch ON.
3. Turn ignition switch OFF and wait at least 10 seconds. TESTING CONDITION:
Before performing the following procedure, confirm that battery voltage is 10 V or more at idle.
>> GO TO 2.
2.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON and wait at least 1 second.
2. Check DTC.
Is DTC detected?
YES >> Go to EC-451, "Diagnosis Procedure". NO >> INSPECTION END
Diagnosis Procedure INFOID:0000000006217952 1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Erase DTC.
3. Perform DTC Confirmation Procedure.
See EC-451, "DTC Logic".
Is the DTC P1606 displayed again?
YES >> Replace VVEL control module. Refer to EC-536, "Removal and Installation". NO >> INSPECTION END
E
__________________

Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz.
Carbon_z is offline   Reply With Quote