Nissan 370Z Forum - View Single Post

Silly Rabbit · 08-03-2014, 07:05 PM

I know you are right. I'm just not looking forward to messing with it again. I will get under there tomorrow and mark it off where it is now and then unbolt the arms and set them so they are in spec and put it back together. I should be able to keep the camber close to where it is now and get the arms in spec. Then I'll deal with another alignment.

I added a comment to the DIY with reference to the SPL spec sheet.

08-03-2014, 07:05 PM	#5 (permalink)
Silly Rabbit Track Member Join Date: Sep 2013 Location: Brookston, IN Age: 54 Posts: 683 Drives: '12 PW Touring Sport Rep Power: 619	I know you are right. I'm just not looking forward to messing with it again. I will get under there tomorrow and mark it off where it is now and then unbolt the arms and set them so they are in spec and put it back together. I should be able to keep the camber close to where it is now and get the arms in spec. Then I'll deal with another alignment. I added a comment to the DIY with reference to the SPL spec sheet. Last edited by Silly Rabbit; 08-03-2014 at 07:10 PM.