Quote:
Originally Posted by zefaulter
oh man, your headlights look awesome!  |
For you and Jlo and everyone else who's asked for a parts list on the lights.....
I'll put this together here and try to update it with links. Again though, I have to say that this thread,
DIY: LED Halo w/Video's , by Nut_N_Much has been the most helpful when doing your headlights.
This is for exactly what I did on mine. There are other variations and some people do different size on the small flasher light but this is the list of things I used.....
parts...
Morimoto XB Halo 90mm-
Morimoto XB LED Angel Eyes - Accessories from The Retrofit Source Inc
Morimoto XB Halo 60mm-
http://www.theretrofitsource.com/led...l#.U9ekxfldWCk
tmart diffuser 90mm-
http://www.tmart.com/90mm-LED-Car-An...r_p127403.html
tmart diffuser 60mm-
http://www.tmart.com/60mm-LED-Car-An...r_p127402.html
G35 Clear Lenses size 2 1/2 – TRS or FX-R-
FX-R - Clear Lenses from The Retrofit Source
LED turn signal cluster-
http://www.ebay.com/itm/140709351646...84.m1439.l2649
LED side marker bulb-
http://www.vleds.com/6-6k.html
HID 6k Headlamp bulb
demon eye mod...
LED strip lights multi-color-
http://www.superbrightleds.com/morei...wfls-rgb/1472/
LED strip light controller with remote-
http://www.superbrightleds.com/morei...emote/110/519/
some extra wiring depending on how/where you decide to mount
supplies...
Automotive GOOP-
http://www.amazon.com/Amazing-3-7-Ou...utomotive+goop
butyl strip sealant-
OCI Butyl Rubber Glue
120,180 and 220 sand paper
Roll of heat shrink
5 minute epoxy
tools...
Skill reciprocating hand saw
Air Grinder or equivalent
10 MM Socket
Phillips screw driver
Wire cutters
Soldering Gun and 18 gauge wire
Heat Gun
Paint for however you want to do it
links updated as of 7/29/2014
as always like and rep, especially for Nut_N_Much and VDC_off and some of the other guys in the DIY thread linked above!!!