Use the following steps to mount the license
plate:
Before mounting the license plate, confirm that
the following parts are enclosed in the plastic
bag.
. License plate bracket
. J-nut 6 2
. Screw 6 2
. Screw grommet 6 2
1. Park the vehicle on flat, level ground. Locate
the two dents*A on the front bumper.
Carefully drill two pilot holes using a 0.39 in
(10 mm) drill bit. (Be sure that the drill
only goes through the bumper fascia.)
2. Insert grommets into the hole on the bumper
fascia.
3. Insert a flat-blade screwdriver into the
grommet hole to add 90 turn onto the part
*B .
4. Make sure the side end surface of the
license plate bracket is aligned with the
bumper*C .
5. Insert a J-nut into the license plate bracket
before placing the license plate bracket on
the fascia
I believe no.3 is why the white things turned , when the screw was inserted!
I can't get the picture to copy from the manual!!!!
__________________
We can do without any article of luxury we have never had; but once obtained, it is not in human nature to surrender it voluntary.
|