View Single Post
Old 07-03-2014, 11:51 AM   #2594 (permalink)
mikey1600
Track Member
 
mikey1600's Avatar
 
Join Date: Jul 2010
Location: Brisbane, Australia
Posts: 503
Drives: MY11 370z Black
Rep Power: 16
mikey1600 is on a distinguished road
Default

Quote:
Originally Posted by Kyle@STILLEN View Post
I have been informed that a few people have questions regarding my original post and that I may not have been very clear in how the O ring seats so I want to elaborate a little bit further.

When tightened, O rings compress. That is why you use them. This compression allows for a tight seal and in the case of a throttle body connection you want to avoid any air leaks, hence the reason for the O ring. When engineering an O ring groove such as we have in the intake manifold. it is important to know the rate at which the O ring compresses. You don't want the throttle body to just sit on the O ring, yet you don't want to overtighten and crush the O ring either. If a foreign object or additional sealant is introduced into the channel that the O ring sits in this will cause excessive pressure as the O ring and the CNC machined channel were not designed to have something else in their space. Think of the saying 10 pounds in a 5 pound bag. The additional material has to go some where and it's going to follow its path of least resistance which is the thinnest part of the casting, hence the images you see where the aluminum is either cracked or warped from the pressure built up from the RTV silicone.

Another question had come up regarding the amount of torque that had been applied to the bolts. Keep in mind that this is a cast aluminum intake manifold with 4 6mm bolts attaching the throttle bodies. There isn't much torque in this application.
I've noticed in the manual while installing my kit, the only parts that specify any torque settings at all is when mounting the manifold, would be good for future people to have more torque settings instead of guessing whether it's tight enough or too tight. (nothing really to do with whether or not he has used silicone, just an observation from myself doing an install this week).
mikey1600 is offline   Reply With Quote