Nissan 370Z Forum - View Single Post

grandpawmoses · 06-28-2014, 08:14 AM

I couldn't get my mirror tap pins to stick in far enough to stay plugged in. I unplugged the connector and used a volt meter to find the correct wires. Then trimmed off some of the tape and soldered the wires directly together. Re taped the wire bundle and plugged it back in. I can't remember which two wire colors without removing the tape but it wasn't what you would think. It wasn't black to black and red to red.

06-28-2014, 08:14 AM	#4 (permalink)
grandpawmoses A True Z Fanatic Join Date: Feb 2014 Location: Northport, Alabama Age: 81 Posts: 1,398 Drives: a hard bargain Rep Power: 27	I couldn't get my mirror tap pins to stick in far enough to stay plugged in. I unplugged the connector and used a volt meter to find the correct wires. Then trimmed off some of the tape and soldered the wires directly together. Re taped the wire bundle and plugged it back in. I can't remember which two wire colors without removing the tape but it wasn't what you would think. It wasn't black to black and red to red. Last edited by grandpawmoses; 06-28-2014 at 08:16 AM.