Quote:
Originally Posted by lineyho
What about the other parts needed highlighted in red below ?
I have FI but have not bought a cooler yet
The Z1 Motorsports Oil Cooler Kit features the following components standard:
•1x 19 Row Oil Cooler Core (Mocal Standard; Additional sizes and Setrab available)
•1x Z1 -10 AN SS Oil Cooler Line Set (Optional protective sleeving available pre-installed)
•1x Mocal Sandwich Adapter (Non-Thermostatic Standard; Optional Thermostatic model available)
•1x Setrab Oil Cooler Lower Mount•1x Z1 Motorsports Oil Cooler Upper Mount
•1x Z1 Motorsports 370Z Oil Cooler Install Hardware Kit
•1x Z1 Motorsports 370Z Oil Cooler Installation Instructions
•2x Setrab (-10 AN to 22mm Port) adapter fittings (Cooler)
•2x Mocal (-10 AN to 22mm Port) adapter fittings (Sandwich adapter)
•2x 13/16" Rubber Seal (Sandwich Adapter)
•1x Power Steering Hose Spacer
|
THe sandwich adapter is there. You are looking for two l shaped brackets that are about 1.5 inched on each side of the L (That's the upper bracket)
The power steering hose space ia about a 3 inch piece of hollow Delron plastic diameter is about .250 or so.
The hardware can be picked up at local hardware and all the fittings are on the hoses except for the ones on the sandwich adapter.