do they still have the same shitty drain and bleed plugs? when i was putting DE's in i check the thread it was clean screwed it in very easily with two fingers for 5 threads then it decided to gall itself the **** in there requiring me to pull it out, chase the threads, throw it in the garbage and go buy a stainless bolt and new nylon gasket to replace it with. if anyone needs to do this i will save you some time it is an m10x1.25 thread and a standard stainless bolt 20mm in length will work, unless the threads in the bung get torn out then you will have to tap it oversize. The bolt can purchased from homedepots bin stock and cost around $2.34, you may have to tapthe hole deeper or cut 12mm off the end of the bolt to get it to go all the way in.
__________________
ANSWER PRICE LIST
Answers - - - - - - - - - - - - - - - - $0.75
Answers (requiring thought) - - - - $1.25
Answers (correct) - - - - - - - - - - $12.50
|