download the fsm and look up the spec? too hard? ok well it is 33ftlbs plus 90degrees. tighten the pulley to 33ft.lbs. with a torque wrench then mark it and turn it another 90 degrees with a breaker bar.
Also if you are following the manual the bolt is non reusable and should be lubed with engine oil lightly prior to instal
__________________
ANSWER PRICE LIST
Answers - - - - - - - - - - - - - - - - $0.75
Answers (requiring thought) - - - - $1.25
Answers (correct) - - - - - - - - - - $12.50
|