Just wanted to share my Memorial day project. Followed other examples online and got some nice wood planks (2x10's) for my rhino ramps. I built it and actually had the ramps on the garage floor, thinking that the carriage pin I used to secure the wood to the plastic ramps would prevent slippage. However, once I tried to roll onto the 'second level' of wood, it slipped
So I relocated the ramps to the edge of the garage where there's a concrete lip and - success!
Mini project done:
I made use of this existing hole in the Rhino ramps to anchor the wood ramps. I slipped a 1/4" carriage bolt through this hole - fit perfect (drilled out the wood and just dropped the bolt in, hammering it snug).
Ready for use:
Okay - step 1
Step 2
And 3! Yay no disaster
Oil change successful