Quote:
Originally Posted by Nargrakhan
I've seen the Powerhouse Amuse bodykit, but I've always wondered something about it... Photos I've seen, seem to indicate it's lower than the NISMO's. Maybe that's because the car photo's I've seen, are also lowered vehicles.
Just out of curiosity: if the Z isn't lowered, how low is the lowest part of that body kit from the ground?
|
As far as I'm concern, the front is the part that you should be concerned most about height wise. The front end is the area that gets abused the most from bums and dips in the road, driveway, ramps and so on.
Anyhoo, for your amusement and to fill your curiosity, I just went out and crawled around in my driveways trying my best to take come measurement/pictures for you. It was hard to take a level shot to get an accurate picture of the measurement but you get the idea. It's hard doing it alone.
front bumper just to show that it start out high then tapers down as it goes towards the rear
/IMG_20140512_093218_zps23137342.jpg[/IMG][/URL]
front bumper/lip it starts to taper around 6 3/8''
lowest part of the undershroud about 1' and a little more in form the front lip
left driver side of the bumper in front of the wheel well
left side rocker to show the profile
left rocker behind the left front tire
left rocker in front of rear tire
rear left bumper
muffler
better muffler measurement shot
exhaust pipe connecting to the muffler ( you can see it in the pic above and how low it sit)
YzGyz