Quote:
Originally Posted by Jordo!
Can you post the hexadecimal code for the map, both the first (1:1) vs he one you arrived at?
|
Jordo,
I do not have access to the hex files in my Dynotronics tune for the throttle response. However, I can post the data logging graphs of the actual throttle, VVT, VVEL responses to throttle pedal input. Apparently these responses are accomplished by bypassing the Uprev throttle table and directly specifying each parameter in the Ecutek software.
The first plot is the throttle opening in degrees (green), VVEL (yellow), VVT (blue) vs. throttle pedal sensor voltage in a 2000 rpm roll on. Idle is about .7 volts and full throttle is about 4.66 volts.
The second plot is the standing start data with the VVT (blue) incorporated into the same graph.
The third plot is the throttle opening in degrees (green) and VVEL (yellow) vs. throttle pedal sensor voltage in a normal standing start.