Quote:
Originally Posted by TedB370z
Thats the issue, because the tips themselves are long, plus the length of pipe between the tips and canisters isn't much (see pic), it might be easier to buy shorter tips...
Attachment 88005
The tips that come on it are about 6.5" from the weld to end of the tip on top and 5.5" from the weld to the end of the tip on the bottom..
Attachment 88006
Attachment 88007
or like someone else suggested, possibly replacing the section of pipe between the canister and the exhaust flange... it would just have to be a much more extreme angle so the tips still line up with the exhaust cutouts on the bumper...
Attachment 88008 |
O ok I gotcha. What I'd do then is remount the hangers and take like an inch or two out of any pipe that's straight. Maybe a mid pipe section? That way you won't mess with angles or bends.