Quote:
Originally Posted by diego@vossen
I made 422HP/318 TQ on a Mustang dyno at 9PSI. My oem CSC failed after 3K miles but has been fine since then and i'm currently at 15K but I will be swapping the OEM clutch/flywheel/CSC asap, just will wait until the OEM starts showing signs of it going out.
The new MAF connections were also installed and made things very easy vs previous kits which required the wires to be spliced. Simply plug and play!
|
Stealing this post and adding it to the FI finished build thread for you.
Quote:
Originally Posted by Nismo6972
Hey, All...Questions:
1. I am in the process of preparing my 370Z for Stillen SC. I have had the JWT clutch and HD CSC installed, as well as a Stillen oil cooler. (Among other unrelated mods, UPREV, SPC Camber, coilovers, sways) I will be looking to get a Radiator and condenser also. Any particular brand recommended, and why?
2. Should my water pump or Thermostat be changed/upgraded?
3. Will my Fast Intentions CBE and HFC's (Non resonated) be adequate, or cause any problems?
4. Any other recommendations?
Thanks....
|
Your list is good, like others have said, get a solid tune and avoid mishi parts.
The thermostat chuck has recommended is very good, I have used it also and it helps a little but is not a huge game changer.
With Texas heat you have to look at the cooling and venting with how hot our summers are. So need adequate cooling measure like CSF radiator and oil cooler, but also need to get the heat out of the engine bay. Another suggestion might be to thermally coat the piping to keep heat out of the piping.