Well it stopped raining so I went out and pulled one of the shims, it has 2 shims in it, started and idles the best it ever has, I have always had a bit of a "wonky" idle as long as I can remember, its frigging perfect. I cannot hear the teeth hitting the sensor either...Im now thinking this has been an issue from day one of the flywheel and the sensor just now failed...I am still going to pull it out at work tomorrow and ispect if the groove is any deeper, if not I will repair the groove, visually inspect the flywheel from the check plate and if I see nothing conclusive I will order a backup sensor to keep in the car and boost on!
|