No worries and sorry for the jacked up response! Okay, I meant that I need front camber arms as stated above. And yes, those are my current camber settings. You may not have as much of an issue scraping as stated because the Nismo nose is longer than the standard body kit. There is absolutely no rubbing from side to side. I would, as suggested add spacers. I have 15mm all around. If I were to do it again I would go with 20s up front.
NORAIN, thank for the translation as you are right on the money. Also, I am dropped 1 inch lower than you stated...so again NORAIN was right on the money. One last thing, I would get a Zspeed undertray. I wore a hole through the OEM tray from scraping on driveways and speed bumps.
__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|
|