Quote:
Originally Posted by jwick
Sasha is that crossover piping larger OD than the current design?
The intercooler pipe is 2.5" diameter.
Sent from my SPH-L710 using Tapatalk
|
Quote:
Originally Posted by TopgunZ
Finger? Mines up against it. And what did you guys do with the yellow wire off the scavage pump wiring?
|
The yellow wire is live when the car is off, so it should be left alone.
Quote:
Originally Posted by jwick
Sasha got some good feedback both on the manual and what it takes to get it installed on a G37. I'm going to wait until the entire process is compelte and I will send you an email.
|
Thank you. I appreciate the time you have taken to let me know how the install went...I will have a look at your build thread as well shortly.
Quote:
Originally Posted by 09nismo498
Mine is resting on the trans as well. I haven't started it yet, but I'm really hoping it doesn't rattle or cause another problem. If it does, I'm not really sure what to do, because theres no way to adjust it any lower, I already tried twice.
|
Quote:
Originally Posted by 09nismo498
my kit is completely installed, and it didn't move at all. i tried everything, but it still rubs the trans. its pushing against the trans, so I'm hoping there is no rattle or anything...
|
This is odd, and I am surprised to hear it. I really do my best with the manifolds to make sure they all fit in the jig and are just like the first one I made. They are welded in 4 stages just so that this doesn't happen. I am starting to think that there is a slight discrepancy with the headers...I have had a Z on my lift for the past three days, and tried a couple of the manifolds that were built on the jigs just to make sure everything is good...and the clearance was great. There was at least a quarter of an inch clearance between the pipes and the transmission.
If you guys are having issues, I am always just a PM away, and would be more than happy to help. I can cover the shipping and do the adjustment on these manifolds if you guys wish...that is no problem at all. Just let me know. I would ship it back within two days.