thank you for the reply!!!
how about the red wire for the camera? shouldn't that be connected to something to power up the camera?? the wire is kind of short so I dont think i can bring it to the head unit
For your pioneer, did u use 3.5mm jack and didn't have to connect any to the swc wires? (pin 6 and 16)
Quote:
Originally Posted by steveg78
I can help with a few since I just did an install myself:
The SWC wires are the ones that send the steering wheel control signals; there is a pos and neg.
The SWC wires for the base stereo are pin 6 and 16 on the vehicle harness (not the metra or whatever aftermarket adapter harness you're using).
Sorry, I'm not familiar with the JVC wiring as I have a Pioneer and it has a 3.5mm jack so no need to use the one that came with the ASWC.
One thing someone else noticed is that if you get only volume controls from the steering wheel, then you need to switch around the wires you tapped into.
Good luck!
|