Quote:
Originally Posted by jwick
I'm going to run the charge pipe fitting hose straight to the compartment with the Brake/Clutch Master Cylinder. Tee it, one running to WGs lower, the other to EBC and then to WGs upper.
If I need more hose should I just buy the silicone hose Treadstone has on their website? I want 6.3mm, right?
|
The nipples on the wastegates and BOV are all 1/4" (6mm), so yes, that hose will be just fine, assuming the that the EBC takes the same size hose. Sometimes they use 4mm hoses on the EBC's...might want to check that out before purchasing more.
For the wastegates and BOV (without EBC) you will need about 12' of hose.
BTW the picture I posted is in the manual
