Quote:
Originally Posted by DjSquall
Where can I get just the gears? My z is up on a hoist with an open pumpkin waiting for a new axle stub... Quaife diff going in
|
If you have an Auto, you can't put the lower gears in because Nissan decide to use a wacky pumpkin scheme instead of going with a typical carrier split that most other manufactures use.
Quote:
Originally Posted by 1slow370
g37 sedan pumpikins do not work only the coupes. the sedans have 3bolt driveshafts
|
All you have to do is change the flange. Yes you will need to ensure you put proper pre-load on the bearings, but it's not that big of a deal, especially if you are changing the differential (inside part). it would be a good idea to freshen it up with new bearings anyway, so as stated earlier, the pinion drive flange difference is not a problem, just swap it with the one you have.
