Nissan 370Z Forum - View Single Post

edconline · 03-23-2014, 04:48 PM

Where are you measuring that length from? I have the OEM studs in front of me and they are 47mm if measured end to end off the car. The .565/14mm knurl is fine for us yes.

Also, in your description above I believe you meant OEM on the left, Z1 on the right.

Edit: Also, I'm getting a 4mm difference front to rear on the studs, but I'm using a tape measure so I'm sure it's not exact. Any particular reason you are looking for such an exact length?

03-23-2014, 04:48 PM	#3 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Where are you measuring that length from? I have the OEM studs in front of me and they are 47mm if measured end to end off the car. The .565/14mm knurl is fine for us yes. Also, in your description above I believe you meant OEM on the left, Z1 on the right. Edit: Also, I'm getting a 4mm difference front to rear on the studs, but I'm using a tape measure so I'm sure it's not exact. Any particular reason you are looking for such an exact length? __________________ View Journal Audio Build Last edited by edconline; 03-23-2014 at 04:51 PM.