Hello there. I am selling my Z1 Motorsport Oil Cooler Kit. I will like to sell it as soon as possible. The kit is slightly used and I mean it, I never finish installing the kit cause I am switching to the Mishimoto Oil kit. I just didn't like how the lines were so close to the Engine Mount.
These are the only slightly used jobs done to it:
- Since I was planning to finish it in one day I put oil in the cooler and there still fresh oil in it.
- Since I was test fitting everything the fittings has some paint off from the tools but they were never tight.
- The only thing tight to 25lbs are the fittings to the oil cooler and the fittings to the sandwich. But I lose one to check everything was still intact.
- The wrapping around the hoses are a bit scratched because of shoving the lines through the holes to reach the sandwich.
- The sandwich adapter of course has some sign of being tight but was never to torque specs
You will get the following:
The Z1 Motorsports Oil Cooler Kit features the following components standard:
1x 25 Row Oil Cooler Core (Mocal Standard; Additional sizes and Setrab available) -
I purchase the Setrab
1x Z1 -10 AN SS Oil Cooler Line Set (Optional protective sleeving available pre-installed) -
I purchased the protective wrap
1x Mocal Sandwich Adapter (Non-Thermostatic Standard; Optional Thermostatic model available) -
I ordered the Thermostatic but Z1 sent the Non- Termostatic
1x Setrab Oil Cooler Lower Mount
1x Z1 Motorsports Oil Cooler Upper Mount
1x Z1 Motorsports 370Z Oil Cooler Install Hardware Kit
1x Z1 Motorsports 370Z Oil Cooler Installation Instructions
2x Setrab (-10 AN to 22mm Port) adapter fittings (Cooler)
2x Mocal (-10 AN to 22mm Port) adapter fittings (Sandwich adapter)
2x 13/16" Rubber Seal (Sandwich Adapter)
1x Power Steering Hose Spacer
I still have all the boxes and everything so it will be well packed and shipped.
I am asking $400 Shipped
