good stuff
this make me remember of the same projects over 1-3 years ago
I just looked at the picture I had about smoothing up the edge in Nov 2011 and porting in Dec 2012
damn time goes fast as we get older
it seem like you are now the guy (not a shop) who will dyno test different part on the VHR engine ! I mentioned it before there is still quite a bit to be gained on the N/A side with the stock engine.
Keep up the result coming !
I might switch those VVEL heads back ! lol....
edit; btw just a headup,, on the first picture , look inside and to the left, I remember I made it smoother going to the front intake runner... there is quite a bit of plastic that can be removed,,,, it wont hurt
on the 4-5-6th pictures, that small bump close to the inlet can be grined down almost flat but not to much (90% flat)
like this
