I used the ATI pod in the center console, they give you a heck of a lot of harness, I have tons of it wraped up behind the dash, so I would say yes no problem, I dropped the o2 wire through the shifter housing right on to the transmission, the oil pressure harness was nowhere near long enough to reach where I put the sensor which is where the OE is as well, its is only 3 wires, I just cut and soldered in about 5 feet of wire to extend it. I plan in wiring the failsafe into the EBC, that I don't have yet but need to get one before the 11th, then it will dump the wastegates if the AFR goes crazy, at least it is some protection!
crappy pic
