Quote:
Originally Posted by cosmogirl
Are you reffering to a sureflow pump and if so since the pump is pre-turbo the heat shouldn't be an issue going through the pump. Also do you think it would affect the thermostat ?
|
No effect on the thermostat as far as I can figure. Not sure on the pump, I've farmed out the thinking on this one. I'll install what he tells me.
Quote:
Originally Posted by cosmogirl
Hey chuck since you have seen the amount that needs to be cut and trimmed to get the maximum flow of those manifolds going to the turbo's what would you recommend to use because in the area it is Very think. I hit it yesterday a little with the tungsten bit and it didn't do much at all...
|
A tungsten carbide bit wouldn't cut cast iron? Odd. That's what I've always used with good success.