View Single Post
Old 03-06-2014, 10:59 PM   #9 (permalink)
Fountainhead
Track Member
 
Fountainhead's Avatar
 
Join Date: Feb 2013
Location: FL
Posts: 834
Drives: 2019 Civic Type R
Rep Power: 14
Fountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud of
Default

Hey Delorean,

If memory serves me correctly, one of those wire harnesses goes into the TFT display, and the other goes in to the module on the rear of the TFT that supposedly does the Apple device interface. There were two large plugs on the rear of my radio TFT when I put the parking bypass module in there behind the TFT. The instruction manual for my bypass module reads thusly: *Installation notes: When installing NI24PIN Y-harness must be connected behind LCD screen directly, in some Nissan vehicles behind
LCD you will find a module, many customers think that this module is part of the screen, this module is NOT a part of the screen and you
must connect Y-harness behind LCD screen, LCD screen and LCD module if attached have identical plugs, keep in mind LCD screen have
only ONE connector while LCD module have few connectors. CONNECT ONLY DIRECTLY INTO LCD SCREEN WITH ONE CONNECTOR

Another view from CourtesyParts.com...http://www.courtesyparts.com/370z-pa...8759_8782.html

Last edited by Fountainhead; 03-06-2014 at 11:04 PM.
Fountainhead is offline   Reply With Quote