Quote:
Originally Posted by Boosted Performance
No issues should ever come up if the instructions are followed. There is plenty of room to keep everything plenty far enough from anything that will get hot.
Your PL turbo blanket will be waaaaaay too small for this turbine housing. You need a large T4 blanket.
|
If you're following the excellent instruction manual you will find the waste gate hoses (any of the kits additional hoses for that matter) don't go anywhere near the hot stuff. That is unless you are making an effort to test the temperature rating of the silicone hoses by wire tying them to the hot pipes. If that's the case... I say good luck to you.
